[ibzy]

Hi guys,

I really need to know how to remove the full glove compartment so that I can replace the damper which for some reason fell out

. I can remove the actual hinged lid and seven screws but the glove compartment is still held by the two panels either side of it i.e. a small panel at the passenger side and a large panel which wraps around the gearbox and stretches down into the passenger footwell. The car is a 2005 2.0 TDCi Zetec.

Thanks in advance.Edited by: ibzy

 

[MetalMicky08]

There are so helpful hints on page 3 of Technical for Focus C-Max in the forum menu,good luck