C-Max Owners Club banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
HI I HAVE A 2 LITRE TDCI (140BHP)
I HAVE FITTED A TOW BAR WHICH I BOUGHT OFF EBAY
PROBLEM I HAVE IS THE WIRING, DOES ANYONE HAVE THE WIRING DRAWINGS OR KNOW THE COLOURS OF THE REAR LIGHTS? AND WHAT THERE FOR?
ALSO I HAVE ONLY SINGLE ELECTRICS IS IT BEST TO WIRE TO NEAR SIDE LIGHTS AND DO I HAVE TO PUT A SUPPLY TO THE OTHER FOR THE INDICATOR?
THANKS
 

·
Registered
Joined
·
133 Posts
if you have got a multimeter you can find the rear light supply but putting the black lead on part of the bare bodywork like the book catch (earth) then try each wire with the red lead (positive) with the lights turned on, when you find the one that reads 12v that that it the wire you need to tap into.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
HI
THANKS FOR THAT, WOULD YOU DO THE SAME FOR THE INDICATORS? AND DO YOU THINK I HAVE WIRE TO THE OTHER SIDE FOR THE OTHER INDICATOR?
 

·
Registered
Joined
·
133 Posts
yeah you do the same for the indicators, you 2 wires for them, one for each side, but when you connect a multimeter to indicator, it will flash 12v on and off with the indicator, but im sure you realise that
 
1 - 6 of 6 Posts
Top