Ford C-Max Forum - View Single Post - EGR VALVE BLANKING OFF
View Single Post
post #2 of Old 09-27-2012, 11:54 AM
Rob_B
Junior Member
 
Join Date: Jul 2012
Location: Peterborough
Posts: 1
Hi Arthur, I have a 1.6 TDCI Zetec, and I was getting an error code for the EGR, so I decided to take the valve off and clean it. When I got it off I found the mechanism under the motor had broken and with it being late Sunday and no way of fixing it, I made a blaking plate to go between the valve and the engine block, out of a pice of 2mm plate. I have found that the car is a little bit smoother around town and when on a long run the MIL light returns, but I just clear it once a week with my code reader.
Rob_B is offline  
 
 
For the best viewing experience please update your browser to Google Chrome